THE LPM SOLUTION FOR EASY MOLD CHANGEOVER
Also in this version, the 4+4 column vertical press has a system that allows the automatic traverse of the upper part of the press. Mold replacement is then made very easily and time-effective with the use of the bridge crane, thus avoiding the use of forklifts or other handling equipment that can interfere with the machine frame. The electric holding refractory furnace, with proportional pressurization control, is brought to working temperature by three heating elements protected by APM tubes mado of sintered steel. The casting ejection is hydraulically operated and a rotary arm catches the piece and removes it from the press by swivelling outwards, thus guaranteeing maximum safety for the operator. Thermal control of the mold is achieved through a system of 8 separate circuits (air, water, or a mix) and PLC managed.
The switch and control cabinet and hydraulic pack complete the assembly.
^ TOP
Technical data
Vertical Press
| longitudinal |
1930 mm |
| transverse |
1250 mm |
| |
1260 mm |
|
110 mm |
| |
540 mm |
| |
200 KN |
| |
250 KN |
| |
250 KN |
| |
180 mm |
| |
60 KN |
| |
1500 x 2300 x 7500 mm |
| |
18000 Kg |
Pressure Furnace
| |
basin furnace |
| |
800 kg | 1000 kg |
| |
32 kW | 38 kW |
| |
Thyristors |
| |
2 bar |
Hydraulic Pack
| |
600 lt |
| |
80 – 120 bar |
| |
22 kW |
| |
piston |
| |
Glycol water |
| |
approx. 450 lt/h |
| |
1300 x 2500 x 1500 mm |
| |
2000 Kg |
Control unit
| SIEMENS |
ALLEN BRADLEY |
| S7 |
SLC 500 |
| |
400 V – 50 Hz |
| |
110 V AC |
| |
24 V DC |
| |
2000 x 500 x 2100 mm |
| |
800 Kg |
Installation data
| Average consumption |
30 kW/h |
| Connected load |
min. 60 kW |
| Pressure |
6 - 8 bar |
| Cooling circuit consumption |
150 Nm3/h |
| Furnace pressurization consumption |
2 Nm3/min |
| Pressure |
2 - 3 bar |
| Hydraulic unit flow rate (with water at 25°C) |
18,5 lt/min |
| Cooling circuit flow rate |
15 lt/min |
^ TOP
Technical specifications
View Allegato
