THE IDEAL MACHINE FOR OEM PRODUCTIONS
The 4+8 column vertical press houses an independent dual mold motion system that allows the machine simultaneous or alternate casting through PLC control.
The large-capacity electric holding refractory furnace, with proportional pressurization control, is brought to working temperature by three heating elements protected by APM tubes made of sintered steel. The casting ejection is hydraulically operated and 2 rotary arms catch the castings and remove them from the press by swivelling outwards, thus guaranteeing maximum safety for the operator. Thermal control of the mold is achieved through a system of 8+8 separate circuits (air, water, or a mix) and PLC managed.
The switch and control cabinet and hydraulic pack complete the assembly.
^ TOP
Technical data
Vertical Press
| longitudinal |
1930 mm |
| transverse |
1250 mm |
| |
1300 mm |
| longitudinal |
900 mm |
| transverse |
1100 mm |
| |
930 mm |
| |
110 mm |
| |
540 mm |
| |
200 KN |
| |
250 KN |
| |
250 KN |
| |
180 mm |
| |
60 KN |
| |
1500 x 2300 x 6450 mm |
| |
15000 Kg |
Pressure Furnace
| |
basin furnace |
| |
1500 kg |
| |
45 kW |
| |
Thyristors |
| |
2 bar |
Hydraulic Pack
| |
1000 lt |
| |
80 – 120 bar |
| |
22 kW |
| |
piston |
| |
Glycol water |
| |
approx. 450 lt/h |
| |
1300 x 2500 x 1500 mm |
| |
2000 Kg |
Control unit
| SIEMENS |
ALLEN BRADLEY |
| S7 |
SLC 500 |
| |
400 V – 50 Hz |
| |
110 V AC |
| |
24 V DC |
| |
2000 x 500 x 2100 mm |
| |
800 Kg |
Installation data
| Average consumption |
30 kW/h |
| Connected load |
min. 60 kW |
| Pressure |
6 - 8 bar |
| Cooling circuit consumption |
150 Nm3/h |
| Furnace pressurization consumption |
2 Nm3/min |
| Pressure |
2 - 3 bar |
| Hydraulic unit flow rate (with water at 25°C) |
18,5 lt/min |
| Cooling circuit flow rate |
15 lt/min |
^ TOP
Technical specifications
View Allegato
